Toilet Auger vs Snake. Which One Would You Choose?

Rate this post

Pick A Toilet may collect a share of sales or other compensation from the links on this page.

Last Updated on August 11, 2022 by acechapman

Everybody has experienced a clogged bathroom. It is possible that you accidentally dropped something into the toilet. So, what should you do to unclog your toilet? How do you unclog it? Let’s find out which one can help you better between these two: toilet auger vs snake.

Toilet augers are primarily used to remove clogs from the toilets. They break down and push through them to clear them. A snake, on the other hand, is designed to pull and catch clogs from faucets. Usually, a snake is shorter than a toilet auger.

toilet auger vs snake

What is a Toilet Auger?

The toilet auger can also be called a closet auger. If a plunger fails to work, usually a toilet auger is used instead. This is often when someone flushes a toy or other item down the toilet.

A closet auger is a long, metal tube that has a hook at its end. The tube is wrapped around the crank and attached to a handle.

Typically, you should first try a plunger. If the plunger doesn’t work, you can then use the toilet auger. The closet auger pushes and also breaks through the clog using its auger head.

How to unclog a toilet with a toilet auger?

Below are the steps:

  1. It is a messy job so make sure to wear gloves.
  2. Start with the auger at the top.
  3. To avoid scratching porcelain, place the hook in the toilet bowl.
  4. Slowly turn the auger to push the tube into your toilet. Continue to crank the auger until you reach the clog.
  5. Push the tube down into the drain. Pull back occasionally to facilitate progress. Then, rotate the auger.
  6. If it becomes too difficult to continue, it is likely that you have found the clog eventually. You can then begin to remove it.
  7. Next, remove the toilet auger. Slowly rotate the auger, then thread it back in the case.
  8. Take out the auger.
  9. To remove any remaining clogs, use a plunger.
  10. To determine if the clog has been removed, flush the toilet several times.
  11. Retry the procedure if the clog persists. If this fails, call a plumber to repair it or find a new method instead.

Different types of toilet augers

Toilet augers all have a common feature, but there are many options. These are just a few examples.

Closet Auger

These augers are especially useful for toilets. These augers are made up of a flexible tube that you can twist and bend to reach a toilet block.

Power Auger

A power auger functions much the same as a closet auger. It has a motor that feeds the tube down to the drain and twists it. So, this auger clears clogs more efficiently than closet augers.

Drum Auger

Drum augers store long cables that are used to unclog drains in a drum-shaped container. This auger has an automatic feed. Thus, allowing you to quickly reach the clogs.

Telescoping Auger

This auger is great for clogs that can’t be removed with a closet auger. Telescoping augers have an extra 3′ of cable that is very useful for deep clogs.

Rocket Nozzle Auger

Rocket nozzle augers use high-pressure water jets to clear clogs. This auger is used when all other methods have failed.

What is a Snake?

To unclog drains in showers, tubs, and sinks, a snake is better than a toilet. A snake should not be used to unclog a toilet. It could scratch the porcelain as a result. The snake is smaller and more efficient than an auger, and it can pull out a clog from a pipe.

There are two main designs. The first is a steel cable that has a coil or spring at the end. This allows you to grab the clog and pull them out. The second design is simply a strip of plastic with protruding edges that can be used to grab the material and pull it out.

toilet auger vs snake

How to use a snake?

A snake works well in showers, tubs as well as sinks. Follow these steps to use the snake

  1. Use gloves. Your drain material is likely to be dirty and may have been treated with harsh cleaners. Rubber gloves are a good option to protect your hands.
  2. Clear out any obstructions and traps that may be blocking your drain.
  3. Then, place the cable. Put the snake in the drain. Push the cable through the pipe, until it is difficult to move. It is likely that the pipe has clogged or is bent.
  4. Twist the snake. This will capture some of the material.
  5. Take the snake out. If you’re lucky, the entire material will fall out. It may come out of your hands or fall off if you are not careful. It can happen, but it doesn’t matter what. Sometimes it takes several attempts.
  6. Repeat. Check to see if the blockage persists. If so, turn it around and withdraw.
  7. Run water down the drain. If it does not drain quickly. Snake again

Toilet Auger vs Snake. What Are The Difference?

Toilet augers consist of a long cable and an auger head. They are great for toilets. These can be turned into break-up clogs. They push and break clogs, usually removing them in one go.

A snake, on the other hand, is a shorter cable or length that you can use for any drain type. It doesn’t push or break a clog, but it does catch it and pull it out of the drain. It may take several attempts to remove a complete clog.

Which tool should you use?

A toilet auger is best for large pipes, such as those with 1 1/2″ to 3″, and any pipes that are not connected to your toilet drain. A drain snake is a good option for smaller pipes that are 2 inches or less in diameter.

Is it safe to pour boiling water down the toilet?

It all depends on what material your pipes are made of. Your pipes made of plastic or PVC could be damaged by boiling water. It would also take a lot of boiling water for the process to work.

Hot water mixed with some detergent might be a good option. For minor clogs, this can sometimes work. You may need to use a plunger or toilet auger for more complicated clogs.

Wrapping up

Hopefully, you’ve learned the difference between a toilet auger vs snake. A toilet auger is a good choice if you have a blocked toilet. These augers are specifically made to deal with tough plumbing clogs. If an auger is not an option, use a drain snake.

However, if your bathtub or sink is clogged, you can set the auger out. The snake is the best option.

Leave a Reply